Sensors

GPS-IDETECT

 

GPS-IDETECT

The patent-pending GPS-IDETECT sensor provides verification that a product producing ions/cold plasma is actually working.  Many of GPS’ competitors provide a “status” contact that is simply a relay tied into the primary power, which only proves power is applied.  An end user would have no confirmation of ion output without a device like the GPS-IDETECT.  The GPS-IDETECT is designed for mounting inside of a duct or on a duct downstream from an ion device.  The detector senses both positive and negative ions.  Once ion levels are detected above a preset factory setpoint (field adjustable), the local LED light will illuminate proving ions are present at a level above the setpoint.  An internal control relay with “dry” contact output is provided that can interface to a BMS.  The GPS-IDETECT can be provided with optional BACnet and LON communication cards in lieu of dry contact output.

GPS-IDETECT Product Data Sheet

 

GPS-IMEASURE

 

GPS-IMEASURE

The patent-pending GPS-IMEASURE takes the GPS-IDETECT to the next level.  This sensor is designed to be wall or duct mounted and measures ion levels in real time.   It provides a 2-10VDC signal to the BMS corresponding to 0-10,000 ions/cc.   It has features including auto-calibration, auto-rezero and only requires 24VDC at 100mA to operate.

GPS-IMEASURE Product Data Sheet

 

GPS-TVOC Sensors

 

GPS-TVOC

The GPS-TVOC sensors are designed to measure TVOCs from 0-5,000 PPM to prove what the ions are actually doing to the air quality.  These sensors can be duct mounted or space mounted.  In some installations, a duct mounted sensor mounted upstream and downstream from the GPS-IBAR proves the one pass effectiveness of the GPS-IBAR system.

GPS-TVOC Product Data Sheet